DJI’s Spreading Wings S800 is a hex-rotor aircraft developed for aerial photography, search and rescue team, and surveillance. Rapid Deployment…redefined. From “in the box” to “in the air” is less than 5 minutes! All electronics, motors and propellers are fully integrated into the molded composite arms; swapping out an entire arm assembly (including Arm, ESC, Motor, and Propeller) can be done without tools in a matter of seconds. With the help of DJI’s WooKong-M autopilot system, large-radius turns, precise hovering, and maintaining constant air speed has never been easier!
THE PROFESSIONAL HEX -ROTOR PLATFORM FOR S800
Spreading Wings S800 is a professional Hex-Rotor Platform Big Aircraft, designed for commercial aerial photography (AP) and experienced model enthusiasts. It has the advantage of stable flight, large load weight and long flight time. Combined with DJI WooKong-M multi-rotor autopilot system, S800 can easily perform precise hovering, constant-speed cruise and big maneuverability turning.
CIRCUIT-INTEGRATED CENTRE FRAME FOR S800
All the circuitries from batteries to electronic components of Frame Arms, PMU and gimbals are integrated into Centre Frame, which simplifies the wiring，reduces the possibility of malfunction and helps a lot to operate quick disassembly.
HIGH-INTEGRATED FRAME ARMS DESIGN FOR S800
With innovative integration design of Frame Arms, all the power and signal wires of motor, ESC and LED indicator are embed into Frame Arms, which makes the S800 Frame Arms look simple and neat, not a batch of separated parts and wires. Special slot design makes Frame Arms and Centre Frame with a complete circuitry. The overall design is safe, reliable, simple and stable, proved by long-time strict testing.
INTEGRATION DESIGN OF ESC FOR S800
The components of ESC are installed inside the neat Frame Arms beneath the motors, which solve the problem of heat radiating. LED indicator is included to ESC, and can be used to easily identify the nose and tail for S800.
THE HIGH PERFORMANCE BRUSHLESS MOTORS FOR S800
Brushless motors with special design and high performance reduce noise and vibration, smooth turning, improve the stability and performance of aircraft, simplify maintaining and extend its lifetime.
HIGH EFFICIENT CARBON FIBER PROPELLERS FOR S800
All the carbon fiber propellers of S800 have been tested for its balance and strictly selected. The carbon fiber propellers have the characteristic of exquisite appearance, light weight, high efficiency, and high strength and so on.
CLEAR INSTALLATION SIGNS FOR S800
Clear guiding signs ( and ) for connection are shown on the Centre Frame and Frame Arms. The connection sequence between Frame Arms and Main Controller is also shown as signs which help avoid incorrect installation.
QUICK ASSEMBLY AND DISASSEMBLY LANDING SKID FOR S800
Simple steps to assemble and disassemble S800 Landing skid, rather convenient to carry and transport. Almost the whole high strength landing skid is made of carbon fiber material, which can support large weight loading with two aspects of tenacity and hardness.
PERFECT WOOKONG-M MATCHED FOR S800
WooKong-M IMU installation position has been reserved in the Centre Frame. In addition, signs on the slot of the Centre Frame clarify the channels’ numbers of the WooKong-M IMU, which helps users to install the autopilot system correctly and rapidly.
WooKong-M is a complete flight control system for all commercial, industrial and professional multi-rotor platforms. WooKong-M utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renowned flight algorithms, and an IMU damping system rated for gas engines. WooKong-M makes flying a multi-rotor aircraft easier than ever; for the first time, inexperienced R/C pilots can learn to fly a multi-rotor in a matter of hours! From the incredibly predictive flight characteristics to the uncanny stability in windy conditions, there are many reasons that WooKong-M is the most popular multi-rotor flight controller in the industry!
DJI WOOKONG MULTI-ROTOR STABILIZATION CONTROLLER FOR WKM
DJI Wookong Multi-Rotor stabilization controller is a complete flight system for all multi-rotor platforms for commercial and industrial AP applications. Unlike others, WooKong allows the use of regular ESC commonly used in RC helicopter without any wiring modification; Heli mode setup providing a seamless transition for current Ace One AP professionals. WK-M utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renounce flight algorithm in autopilot and UAV.
9 TYPES OF MULTI-ROTORS AND A CUSTOMIZED MOTOR MIXER FOR WKM
Support 9 traditional motor mixer:
Quad I, Quad X
Hexa I,Hexa V, Hexa Y, Hexa IY
Octo X, Octo I,Octo V
It’s an UAS that targeting at commercial and industrial multirotor platform with simple configuration, easy installation and stable performance.
GIMBAL STABILIZATION FOR WKM
The gimbal stabilization module is compatible with most 2-axis gimbal systems. The system will adjust the camera according to the attitude of the aircraft after setting the parameters the first time. The scope of the gimbal servo output frequency is 400hz, 200hz, 100h and 50hz, the higher frequency output makes the adjustment more efficient. At the same time, the limit of the gimbal servo rolling and pitching is extended to 90°.
SUPPORTING FUTABA S-BUS RECEIVER FOR WKM
Compatible with almost all radios-PCM or 2.4Ghz
POWER MONITORING UNIT FOR WKM
Specially designed for WKM to solve the high power consumption problem of power support system. It contains two power outputs for entire WKM system andreceiver separately, a battery voltage monitor, and two CAN-Bus interfaces.
BUILT-IN DAMPER FOR WKM
Small footprint and weight ease installation in tight space and various aircraft sizes.
PRECISE POSITION AND ALTITUDE HOLD FOR WKM
With WKM, the multirotors will have position and altitude lock in windy conditions. Precise hovering in less than 2m horizital and and 0.5m vertical.
HIGH ACCURACY AND DRIVING HANDFEEL FOR WKM
With the WKM, flying a multi-rotor will be as easy as driving a car. The pilot is released from the stress of control the multi-rotor and able to pay more attention to other tasks such as camera angle, instead of focus on flying.
MOTOR ARM/DISARM MODE FOR WKM
1. Start Motor: When using WKM, pushing throttle stick before takeoff will not start motors. You have to execute any one of following four Combination Stick Commands (CSC)to start motors.
2. Stop Motor: We provide two options to stop motors: Immediately, Intelligent.
ImmediatelyMode:By using this mode, in any control mode, once motors start and throttle stick is over 10%, motors will stop immediately when throttle stick is back under 10% again. In this case, if you push the throttle stick over 10% in 5 seconds after motors stop, motors will re-start, CSCis no need. If you don’t push throttle stick after motors start in three seconds, motors will stop automatically.
IntelligentMode: By using this mode, different control mode has different way of stopping motors. In Manual Mode, only executing CSCcanstop motors. In Atti.orGPS Atti. Mode, any one of following four cases will stop motors:
MULTIPLE FLIGHT CONTROL MODE/ INTELLIGENT SWITCHING FOR WKM
GPS Atti. Mode
Command Stick Meaning
Multi attitude control; Stick center position for 0º attitude, its endpoint is 35º.
Maximum angular velocity is 150°/s. No attitude angle limitation and vertical velocity locking.
Lock rotor position when GPS signal is adequate.
Only attitude stabilizing.
Maintain the altitude best above 1 meter from ground.
After 10s when GPS signallost, system enters Atti. Mode automatically.
Only performing attitude stabilizing without position lock.
Attitude & speed mixture control ensures stability; Enhanced fail-safe
Depends on experience.
POINT OF INTEREST (POI) FOR WKM
WooKong-M has a new function: Point of Interest. When the GPS signal is good, users can record the present position of the aircraft as a point of interest by the preset switch on the remote controller. The aircraft could achieve a circle flight around the point of interest with the nose in the point in an area of 5 meters to 500 meters radius, when the rolling command is given. This function is easy to set up and convenient to operate, it is suitable for all-round shooting of a fixed scenic spot.
RTH SWITCH FROM TRANSMITTER FOR WKM
In addition to the function of failsafe RTH, WooKong-M now has a new function of RTH switch from transmitter. It is unnecessary to turn into failsafe mode.
PPM RECEIVER SUPPORTED FOR WKM
WooKong-M now supports PPM receiver, with the installation of PPM receiver the internal wiring will become more concise and beautiful.
INTELLIGENT ORIENTATION CONTROL (IOC)
Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points,the forward direction has nothing to do with nose direction:
In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 2)：
In home lock flying, the forward direction is the same as the direction from home point to multi-rotor.See the following figures (Mode 2)：
ENHANCED FAIL-SAFE AND AUTO GO HOME/LANDING
Enhanced fail-safe is the feature to ensure that the multi-rotor will hover automatically when it loses RC signal. After loss of signal for a certain length of time, WKM will calculate the safest route to the home position and control the multi-rotor to return home, hovering over your GPS start point eventually and then auto landing. This feature will guarantee the safety of your expensive payloads and equipment on the platform.
TWO LEVELS LOW VOLTAGE PROTECTIONS AND AUTO GO HOME
In order to preventyour multi-rotor from crash or other harmful consequences caused by low battery voltage, we have designed two levels low voltage protections. You can choose to not to use them, All two level protections have LED warning as default. First level will blink yellow light ceaselessly; second level will blink red light ceaselessly. Compare the Go Home and Landing of low voltage protection and the Go Home and Landing in Enhanced Failed-safe, the generations of Home Location are the same; the Go Home routes are the same; the difference is that there is no hovering before landing in low voltage protection.
UPGRADE TO GROUND STATION CONTROL SYSTEM
WooKong-M can be upgraded to ground station which is a more powerful unmanned platform to satisfy the highly requirement of customers.
Now you just need to buy a DJI professional data link to activate WooKong-M single waypoint for free. Besides the 3D map, it also contains such ground control function as joystick/keyboard control, one key takeoff and click & go. Customers can activate different functions to meet the real requirement.
Plain and simple…gone are the days of shaky, unstable footage! Whether you are shooting a movie or commercial, or performing a search and rescue mission, shaky footage is the number one problem plaguing the aerial photography industry. After all, what good is a view from the sky if it’s unusable? Through the use of 3-axis gyros, inertial measurement unit feedback, and special 3-DOF servo drive modules, the Zenmuse line of camera gimbals achieve sub-pixel stabilization. This performance was previously only achieved in the most expensive full-scale helicopter gimbals; most of which cost upwards of $500,000. Now, for less than 1% of that cost, you can achieve perfectly stable footage every flight…even in windy conditions!
3-AXIS PROFESSIONAL GIMBAL WITH HIGH PERFORMANCE FOR ZENMUSE
DJI Zenmuse Gimbal is a milestone gimbal system which is developed for professional filming, aerial photography for commercial use. Even if aircrafts are in a fast-speed flight, it can still stabilize and control the camera equipment precisely with highest stability. The precision of control angle is within the range of ±0.05°, so picture or video output can reach the best effect.
GIMBAL DESIGN CUSTOMIZED FOR DIFFERENT CAMERAS FOR ZENMUSE Z15
In order to make the gimbal function the best, DJI provides the customized Gimbal according to the types of camera. For example, the Zenmuse Z15 supports two types of camera, which are Sony Nex5/7 and Panasonic GH2. One type of Gimbal can only support one serial of camera. When users want to use a different series of camera, they need purchase the additional accessories related.
MULTIPLE CONTROL MODES FOR ZENMUSE Z15
Zenmuse gimbal system has three types of control modes, which are Orientation-locked control mode, Non Orientation-locked control mode and Back to Mid-point mode (Horizontal mode). The three types of modes can be switched quickly from one mode to another to meet the different requirements of aerial photography. With the perfect mode and easy operation of the stable 3-axis Zenmuse gimbal, users can take excellent aerial works.
3-AXIS ROTATION ANGLE UNLIMITED FOR ZENMUSE Z15
The 3-axis Zenmuse gimbal system has creative design for its mechanical structure design. The slip rings inside avoid the complicated wiring. All the wires of the power and signal lines are integrated into pipes of the Gimbal , which makes the axis can rotate without any limitation. The Yaw control could reach ±360°, the Pitch control could reach ±360° and the Roll control could reach ±40° (±360° mechanic continuous rotation).
BUILT-IN INDEPENDENT IMU MODULE FOR ZENMUSE Z15
Due to DJI years UAV autopilot system achievement into perfect attitude-stabilized algorithm, together with the high-precise induction device, it can have perfect performance on attitude control. Without the requirement of extra installation and connection of extra wires, it is easy to assemble and it can maintain stable when flying.
INDEPENDENT GIMBAL CONTROLLER FOR ZENMUSE Z15
The separated controller equipped to gimbal is connected by the CAN wires with the main controller of DJI autopilot system. According to gimbal attitude feedback, it can control the rotation directions and angles high precisely and also communicate and get real-time control orders from the main controller of autopilot system.
DJI GIMBAL SPECIAL SERVOS DRIVE MODULE FOR ZENMUSE Z15
DJI Customized Gimbal Special Servos Drive Module meets all the control requirements of high performance Zenmuse gimbal. With high precision, low vibration, high torque characters，DJI Gimbal Special Servos Drive Module is an excellent combination of drive and module.
HDMI-AV MODULE FOR ZENMUSE Z15
In order to minimize the payload of aircraft, the video output module with expanded features like camera shutter is customized to transform HDMI signal to AV in neat wiring, which ensure the smooth and free movement of the 3 axial Gimbal.
S-BUS RECEIVER SUPPORT FOR ZENMUSE Z15
It supports most of transmitters and receivers in the market. At the meantime, it provides Futaba S-Bus receiver support and it is user-friendly.
3-AXIS ROTATION CONTROLLED FOR ZENMUSE Z15
Zenmuse Gimbal 3-axis rotation controlling function is simple and easy to apply. Stick range corresponds with rotation speed of gimbal axis. Excellent control algorithm guarantee high precision performance of the axis rotation. Zenmuse gimbal rotation speed will not be influenced even when the aircraft is in high-speed spinning or quick lifting.
Regular Price: $10,000.00
Sale Price : $9,000.00
+ Size Chart
Diagonal Wheelbase 800mm
Frame Arm Length 350mm
Frame Arm Weight
(Including Motor, ESC, Propeller ) 304g
Center Frame Diameter 240mm
Center Frame Weight 365g
Bi-pod Size 500mm(Length)×415mm(Width)×320mm(Height)
(Top width: 145mm)
Bi-pod Weight 428g
Total Weight 2.6Kg
DJI S800 HEXACOPTER with ZENMUSE Z15 + WK-M Autopliot + FUTABA 8FG RADIO - READY-TO-FLY